V2 Table List

Table of codes specifying a patient's sex.

Table of codes specifying a person's marital (civil/legal) status.

HL7-defined table of codes specifying the trigger event for Version 2.x interface messages.

Table of codes used by systems to categorize patients by site in HL7 Version 2.x interfaces.

Table of codes specifying the patient's race. These values are suggestions only, they are not required for use in HL7 messages.

Table of codes specifying a person's religion.

Table of codes specifying the circumstances under which the patient was or will be admitted.

HL7-defined table of codes specifying acknowledgment codes used in Version 2.x message. For details of usage, see message processing rules in the published Standard.

Table of codes specifying permanent or transient handicapped conditions of a person.

Table of codes specifying the attending physician information. No suggested values.

Table of codes for charging system. Not used after HL7 2.1. No suggested values.

Table of codes specifying the stock location. Table is no longer published as part of the relased standard after version 2.2.

Table of codes that identify reasons for patient isolation. Not used after HL7 2.1.

Table of codes specifying a type of financial transaction.

Table of codes specifying the patient type. No suggested values.

Table of codes specifying the anesthesia used during the procedure. No suggested values.

Not used in HL7 Version 2.x messaging; publishing artifact.

Table of codes specifying the bad debt agency to which the account was transferred. No suggested values.

Table of codes specifying whether the particular insurance has been billed and, if so, the type of bill. No suggested values.

Table of codes specifying where the patient was admitted. No suggested values.

Table of codes specifying the appropriate fee schedule to be used for this transaction posting. No suggested values.

HL7-defined table of codes specifying the allowed priorities for obtaining the specimen.

Table of codes specifying which price schedule is to be used for room and bed charges. No suggested values.

Table of codes that indicate a means of administrating a medication dose. As of HL7 version 2.3, it was replaced by tables 0162 Route of Administration and table 0165 Administration Method.

Table of codes specifying a location on the body where a dose is to be administered, e.g., IV, IM, Subcutaneous. Used in HL7 Version 2.1 messaging only in the RX1 segment; as of version 2.2 it has been replaced with table 0163 Body Site.

HL7-defined table of codes specifying the status of an order. The purpose of these values are to report the status of an order either upon request (solicited), or when the status changes (unsolicited). The values are not intended to initiate action. It is assumed that the order status value always reflects the status as it is known to the sending application at the time that a message is sent. Only the filler can originate these values.

Table of codes specifying an insurance company plan uniquely. No suggested values.

Table of codes specifying the condition code. These codes are defined by CMS or other regulartory agencies. No suggested values.

Table of codes specifying the type of contract entered into by the healthcare facility and the guarantor for the purpose of settling outstanding account balances. No suggested values.

Table of codes specifying whether the patient will be extended certain special courtesies. No suggested values.

Table of codes specifying past credit experience. No suggested values.

HL7-defined table of concepts which specify actions to be taken with respect to the specimens that accompany or precede an order. The purpose of these are to further qualify (when appropriate) the general action indicated by the order control code (code system 2.16.840.1.133883.18.25).

HL7-defined table of concepts which specify the kind of information that is required to satisfy a query request. The values define the type of transaction inquiry.

Table of codes specifying the department code that controls the transaction code. No suggested values.

Table of codes specifying the type of accident. No suggested values.

Table of codes specifying the primary diagnosis code for billing purposes. No suggested values.

Table of codes that specify a type of diagnosis being sent.

Table of codes specifying a diagnosis coding method. No suggested values. Table is no longer published as part of the released standard after version 2.5.1.

Table of codes specifying the diagnostic related group (DRG) for the transaction. No suggested values.

Table of codes specifying that the grouper results have been reviewed and approved. No suggested values.

HL7-defined table of concepts which specify a categorical assessment of an observation value (carried in HL7 V2.x field OBX.5), such as "Normal", "Abnormal", "Positive", "Negative", "Resistant", "Susceptible", etc.

Table of codes specifying the type of consent that was obtained for permission to treat the patient. No suggested values.

Table of codes that identify an error. Not used after HL7 2.2. No suggested values.

HL7-defined table of codes specifying the check digit scheme employed.

Table of codes which specify the reason for an event.

Table of codes specifying an actual personal relationship that the next of kin/associated party has to a patient.

Table of codes specifying the financial class assigned to a person. No suggested values.

HL7-defined table of codes which specify actions to be taken with respect to the specimens that accompany or precede an order. The purpose of these are to further qualify (when appropriate) the general action indicated by the order control code ( table 0119).

Table of codes specifying the guarantor's employment status.

Table of codes specifying the type of guarantor, e.g., individual, institution, etc. No suggested values.

Table of codes specifying the treatment or type of surgery the patient is scheduled to receive.

HL7-defined table of concepts which specify sources for speciments for clinical testing. These concepts are used in HL7 Version 2.x messaging in the OBR segment prior to version 2.7, and was replaced by the concepts in table 0487 Specimen Type and table 0488 Specimen Collection Method as of version 2.5 and thereafter.

Table of codes specifying the identifier of an insurance plan with which a transaction should be associated. No suggested values.

Table of codes specifying the amount of interest that will be charged the guarantor on any outstanding amounts. No suggested values.

HL7-defined table of codes which specify a section of a diagnostic service where an observation may be performed.

Table of codes for report types. Not used after HL7 2.1. No suggested values.

HL7-defined table of codes which specify message types.

HL7-defined table of codes which specify a categorical assessment of an observation value.

Table of codes that identify a bed location. Not used after HL7 v2.2 No suggested values.

HL7-defined table of codes specifying the nature of an abnormal test.

HL7-defined table of concepts which are used to specify the source of a comment, as used in HL7 Version 2.x messaging in the NTE segment.

Table of codes specifying the type of outlier (i.e. period of care beyond DRG-standard stay in facility) that has been paid.

Table of codes specifying a composite number/name of a person/group that performed a test/procedure/transaction, etc. No suggested values.

HL7-defined table of codes which specify observation result status. These codes reflect the current completion status of the results for one Observation Identifier.

Table of codes specifying the coding structure that identifies the various plan types (i.e., Medicare, Medicaid, Blue Cross, HMO, etc.). No suggested values.

Table of codes specifying whether the patient must have pre-admission testing done in order to be admitted. No suggested values.

Table of codes specifying a unique identifier assigned to a procedure, if any, associated with a charge.

Table of codes that specify the methodology used to assign a code to a procedure (CPT4, for example). Used for backwards-compatibility purposes. No suggestted values.

Table of codes that further define a type of procedure. Not used after HL7 2.2. No suggested values.

HL7-defined table of codes which specify a time frame in which a querry response is expected.

Table of codes which are used to specify that a patient is being re-admitted to a healthcare facility from which they were discharged, and indicates the circumstances around such re-admission.

Table of codes specifying whether the healthcare provider can release information about a patient and what information can be released.

Table of codes that indicate if the insurance sends a report indication that the patient is eligible for benefits and identifying what those benefits are. Replaced by table 0136 after HL7 2.2. No suggested values.

HL7-defined table of concepts which, for an order, indicate the amount of information to be returned from the filler for the response to the order. Sometimes the requested level of response may not be possible immediately, but when it is possible, the filler (receiving) application must send the information. Used in HL7 Version 2.x messaging in the ORC segment.

Table of codes which specify codes to further identify an insurance plan.

Table of codes specifying a type of VIP. No suggested values.

HL7-defined table of codes which specify codes for an event precipitating/triggering a charge activity.

HL7-defined table of concepts which specify the maximum length of a query response that can be accepted by a requesting system, and are expressed as units of mesaure of query response objects. Used in HL7 Version 2.x query messaging.

HL7-defined table of concepts which specify a response type used in deferred processing two phase reply for delayed acknowldgement mode of the original acknowledgement mechanism defined in HL7 Version 2.x messaging.

HL7-defined table of codes which specify whether the message is part of a production, training or debugging system.

HL7-defined table of codes which are used to identify an HL7 version in the Version 2.x family of published standards.

HL7-defined table of codes which are used to specify the source of a comment.

HL7-defined table of concepts which specify which of several types of formats for data to be returned in response to a query.

HL7-defined table of concepts which specify which type of deferred query resonse is desired, as specified with the query parameters.

HL7-defined table of concepts which are used to control level of detail in query results.

HL7-defined table of concepts which specify the priority associated with a report or update run using a query.

Table of codes specifying that the account was transferred to bad debts and gives the reason. No suggested values.

Table of codes specifying that the account was deleted from the file and gives the reason. No suggested values.

Table of codes which specify the disposition of the patient at time of discharge (i.e., discharged to home, expired, etc.). No suggested values. In the US, this field should use the Official Uniform Billing (UB) 04 2008 numeric codes found on form locator 17.

Table of codes specifying the healthcare facility to which the patient was discharged. No suggested values.

Table of codes specifying a special diet type for a patient. No suggested values.

Table of codes specifying the healthcare facility with which this visit is associated in a multiple facility environment. No suggested values.

Table of codes which specify the state of a bed in an inpatient setting, and is used to determine if a patient may be assigned to it or not.

Table of codes specifying the account status. No suggested values.

Table of codes specifying the major diagnostic category. No suggested values.

HL7-defined table of codes which are used to determine the function of the order segment. Depending on the message, the action specified by one of these control codes may refer to an order or an individual service.

HL7-defined table of codes allowing the placer (sending) application to determine the amount of information to be returned from the filler.

HL7-defined table of codes which specify someone or something other than the patient to be billed for a service.

HL7-defined table of codes which specify a status of results for an order.

HL7-defined table of codes which specify how (or whether) to transport a patient, when applicable, for an ordered service.

HL7-defined table of codes specifying the format of the observation value in the Observation Result (OBX).

HL7-defined table of codes which specify the maximum length of a query response that can be accepted by a requesting system, and are expressed as units of mesaure of query response objects.

Table of codes speciying a classification of general allergy categories (drug, food, pollen, etc.).

Table of codes which specify the general severity of an allergy.

Table of codes specifying the fiancial accommodation type of the bed or room which implies the rate to be used when occupied by a patient under specific medical conditions, which determines how it is billed. No suggested values.

Table of codes which specify categories of a patient's visit with respect to an individual institution's needs, and is expected to be different on a site-specific basis.

Table of codes which specify a relationship role that the next of kin/associated parties plays with regard to a patient. Also used in referrals, for example, it may be necessary to identify the contact representative at the clinic that issued a referral.

Table of coded codes that are used by an institution for the purpose of uniquely identifying a transaction based on the Transaction Type. For example, procedure, supply item, or test for charges; or to identify the payment medium for payments. No suggested values.

HL7-defined table of concepts which specify the different types of practitioners associated with this procedure. This set of codes is known to be incomplete. Note that as of v2.6, this table and the field(s) it was used in was replaced by table 443 used in the ROL segment.

Table of codes which indicate whether an insured person agreed to assign the insurance benefits to a healthcare provider. If so, the insurance will pay the provider directly.

HL7-defined table of codes specifying either Yes or No used in fields containing binary answers generally user-specified. The actual interpretation of Yes/No is context sensitive. Individual chapters will further refine the meaning of Yes/No in their specific context.

Table of codes which specify a party to which a claim should be mailed when claims are sent by mail.

Table of codes specifying the required employer information data for UB82 form locator 71. No suggested values.

Table of codes which specify the military branch. This field is defined by CMS or other regulatory agencies.

Table of codes which specify the military rank/grade of the patient. Australia: https://en.wikipedia.org/wiki/Australian_Defence_Force_ranks Canada: http://www.forces.gc.ca/en/honours-history-badges-insignia/rank.page United States: published in the Defense Travel Administrator's Manual, Appendix M: Military Rank/Civilian Pay Grade Abbreviations and Service Agency Names, http://www.defensetravel.dod.mil/Docs/Training/DTA_App_M.pdf

Table of codes which specify the military status of the patient. This field is defined by CMS or other regulatory agencies.

Table of codes specifying the reason a service is not covered. No suggested values.

Table of codes which specify the source of information about the insured's eligibility for benefits.

Table of codes which specify the room type.

Table of codes which specify amount quantity type.

Table of codes which specify the policy type.

HL7-defined table of codes which specify whether the amount is currency or a percentage.

Table of codes which specify whether the days are denied, pending or approved.

Table of codes which specify the category or type of patient for which this certification is requested.

Table of codes specifying the status of the second opinion. No suggested values.

Table of codes specifying if accompanying documentation has been received by the provider. No suggested values.

In the US, NUBC codes are generally used, see code system 2.16.840.1.113883.6.301.6; more information may be found at http://www.nubc.org/become.html

HL7-defined table of codes which identify conditions under which accept acknowledgments are required to be returned in response to a message, and required for enhanced acknowledgment mode.

HL7-defined table of codes that specify the type of date referred to in the other date fields in the QRF segment.

HL7-defined table of codes that specify the status type of objects selected in date range defined by QRF-2 and QRF-3.

HL7-defined table of codes that allow the specification of certain types of values within the date/time range.

HL7-defined table of codes which specify the type of diet.

HL7-defined table of codes which specify the type of dietary tray.

HL7-defined table of codes which specify whether substitutions are allowed and, if so, the type of substitutions allowed.

Table of codes which specify the route of administration.

HL7-defined table of codes that specify a body site from which a specimen is obtained.

Table of codes which specify the mechanical device used to aid in the administration of the drug or other treatment. Common examples are IV-sets of different types.

Table of codes which specify the specific method requested for the administration of the drug or treatment to the patient.

HL7-defined table of codes which specify the RX component type.

HL7-defined table of codes which specify the substitution status.

HL7-defined table of codes which specify one or more available priorities for performing the observation or test.

HL7-defined table of codes which specify the available priorities reporting the test results when the user is asked to specify the reporting priority independent of the processing priority.

HL7-defined table of codes which specify the parents and children for diagnostic studies, especially in microbiology, where the initial specimen (e.g., blood) is processed to produce results (e.g., the identity of the bacteria grown out of the culture). The process also produces new "specimens" (e.g., pure culture of staphylococcus, and E. coli), and these are studied by a second order process (bacterial sensitivities). The parents (e.g., blood culture) and children (e.g., penicillin MIC) are identified in such cases.

Table of codes specifying the information related to a person's country citizenship. No suggested values.

Table of codes specifying the military status assigned to a veteran. No suggested values.

Table of codes specifying whether this insurance works in conjunction with other insurance plans or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.

Table of codes specifying an identification of a test battery, an entire functional procedure or study, a single test value (observation), multiple test batteries or functional procedures as an orderable unit (profile), or a single test value (observation) calculated from other independent observations, typically used as an indicator for Master Files.

HL7-defined table of codes which are represented by codes identifying HL7 Versions 2.x Master Files.

Table of codes that uniquely identify an application responsible for maintaining a master file of a particular type at a particular site. Not used after HL7 v2.2 No suggested values.

Table of codes specifying the degree to which special confidentiality protection should be applied to the observation.

HL7-defined table of codes specifying file-level events for master files.

HL7-defined table of codes specifying application response levels defined for a given Master File Message at the MFE segment level, and used for MFN-Master File Notification message.

HL7-defined table of codes specifying an action for a master file record.

Table of codes specifying the status of the requested update. Site-defined table, specific to each master file being updated via this transaction.

Table of codes specifying the staff person's sex. No suggested values.

HL7-defined table of codes specifying whether a person is currently a valid staff member.

Table of codes specifying the institution department to which this person reports or belongs. No suggested values.

HL7-defined table of codes specifying which of a group of multiple phone numbers is the preferred method of contact for this person.

Table of codes specifying the category of practitioner. No suggested values.

HL7-defined table of codes specifying how provider services are billed.

Table of codes specifying the individual responsible for triggering the event. No suggested values.

Table of codes further defining a patient's ancestry. In the US, a current use is to use these codes to report ethnicity in line with US federal standards for Hispanic origin.

HL7-defined table of codes specifying types or kinds of addresses.

HL7-defined table of codes declaring the general type of media data that is encoded.

HL7-defined table of concepts defining whether patient transportation preparations are in place.

Table of codes specifying the amount quantity class.

HL7-defined table of codes for types of names for persons.

HL7-defined table of codes for specifying a specific use of a telecommunication number. Best practice is to use this concept whenever a telecommunication number or access string is specified.

HL7-defined table of codes for specifying a type of telecommunication equipment. Best practice is to use this concept whenever a telecommunication number or access string for particular equipment is specified.

HL7-defined table of codes specifying the type of identififier.

Table of codes used to specify the type of name for an organization i.e., legal name, display name.

HL7-defined table of codes used to identify the intent for the dollar amount on a pricing transaction.

HL7-defined table of codes specifying actions to be applied for segments when an HL7 version 2 interface is operating in "action code mode" (a kind of update mode in the Standard).

HL7-defined table of codes that indicate an archival process or an initial load process.

HL7-defined table of codes defining precise response status concepts in support of HL7 Version 2 query messaging. It is commonly used to indicate no data is found that matches the query parameters, but no error.

HL7-defined table of codes used to define the relationship between HL7 segment field names identified in a query construct.

HL7-defined table of codes used with relational operator values to group more than one segment field name.

Table of codes that identify one of a number of possible standard alternate character sets for a message, either single-byte or double-byte.

Table of codes that identify the nation or national grouping to which the person belongs. This information may be different from a person’s citizenship in countries in which multiple nationalities are recognized (for example, Spain: Basque, Catalan, etc.). No suggested values.

Table of codes used to define the state of a visit relative to its place in a purge workflow.

Table of codes used to record a health insurance program required for healthcare visit reimbursement.

Table of codes specifying a level of publicity of information about a patient for a specific visit.

Table of codes used to define the state of a care episode for a patient.

Table of codes used to define a relative level of urgency applied to a patient visit.

Table of codes used to indicate which adjustments should be made to a guarantor’s charges. For example, when a hospital agrees to adjust a guarantor’s charges to a sliding scale. No suggested values.

Table of codes used to indicate whether a treatment is continuous. No suggested values.

Table of codes characterizing the situation that patient-associated parties live in at their residential address.

Table of codes used to indicate a reason for contacting a guarantor, for example, to phone a guarantor if payments are late. No suggested values.

Table of codes identifying specific living conditions (e.g., spouse dependent on patient, walk-up) that are relevant to an evaluation of the patient's healthcare needs.

HL7-defined table of codes defining whether patient transportation preparations are in place.

HL7-defined table of codes indicating whether a patient must be accompanied while travelling to a diagnostic service department.

Table of codes specifying the organization that manufactures a vaccine. The values are maintained by the US Centers of Disease Control. Note that the source of truth for these code values are maintained by the CDC, and the code system may be accessed at URL: https://phinvads.cdc.gov/vads/SearchCodeSystems_search.action?searchOptions.searchText=PH_ManufacturersOfVaccinesMVX_CDC_NIP. The value set is also maintained by the CDC, and may be accessed at URL: https://phinvads.cdc.gov/vads/SearchValueSets_search.action?searchOptions.searchText=PHVS_ManufacturersOfVaccinesMVX_CDC_NIP

Table of codes used to classify whether a patient visit can be related to a diagnosis.

Table of codes used to identify a Diagnostic Resource Group Payor. US Realm. No suggested values.

Table of codes used to classify a procedure.

Table of codes used to designate whether a guarantor is a full or part time student.

Table of codes used to describe why an insurance company has been contacted.

Table of codes that specify a non-concur code and description for a denied request, used in insurance claims processing. No suggested values.

HL7-defined table of codes used to identify the time span of a report or the reason for a report sent to a regulatory agency.

HL7-defined table of codes used to identify where a report sender learned about an event.

HL7-defined table of codes used to identify the type of entity to which the event has been reported.

HL7-defined table of codes used to qualify an event related to a product experience.

HL7-defined table of codes used by a sender to designate an event as serious or significant.

HL7-defined table of codes used to communicate whether an event has been judged to be expected or unexpected.

HL7-defined table of codes used to describe the impact of an event on a patient.

HL7-defined table of codes used to describe the overall state of a patient as a result of patient care.

HL7-defined table of codes used to provide a general description of the kind of health care professional who provided the primary observation.

HL7-defined table of codes used to define whether the primary observer has given permission for their identification information to be provided to a product manufacturer.

Table of codes that indicate whether a product is designed for a single use. No suggested values.

Table of codes used to indicate if a product problem would exist if a product malfunction could lead to death or serious injury. No suggested values.

Table of codes used to indicate that the product is available for analysis. No suggested values.

HL7-defined table of codes that describes the status of product evaluation.

HL7-defined table of codes used to describe the evaluation state of a product identified in an incident.

Table of codes used to indicate whether the product used is a generic or a branded product. No suggested values.

HL7-defined table of codes used to provide an estimate of whether an issue with a product was the cause of an event.

HL7-defined table of codes used to define the action taken as a result of an event related to a product issue.

HL7-defined table of codes used to record event observations regarding what may have caused a product related event.

HL7-defined table of codes used to identify the mechanism of product transmission when the product has not been directly applied to the patient.

HL7-defined table of codes that describe the underlying kind of property represented by an observation. The categories distinguish concentrations from total amounts, molar concentrations from mass concentrations, partial pressures from colors, and so forth. These are discussed more fully in the LOINC Users' Manual. They are derived from the approach described in 1995 edition of the IUPAC Silver Book. These distinctions are used in IUPAC and LOINC standard codes. The distinctions of true quantities in this table are based primarily on dimensional analyses. The table contains a number of "families," those related to simple counts (number, number concentration, etc.), to mass (mass, mass concentration, etc.), to enzyme activity (catalytic content, catalytic concentration, etc.), and molar or equivalents (substance content, substance concentration).

Table of codes used to classify an observation definition as intended to measure a patient's state at a point in time.

HL7-defined table of codes used to classify an observation definition as being a component of a challenge test.

HL7-defined table of codes used to further describe an observation definition that is characterized as a challenge observation.

HL7-defined table of codes used in an observation definition to describe the subject of an observation in relation to a patient.

Table of codes used to define the imaging apparatus expected to be used to acquire an observation. This table has been removed from the standard as of 2.7 in favor of table 0910.

Table of codes used to identify the kind of location described in the location definition.

Table of codes used to identify the equipment available in a location definition identified as a room or bed.

Table of codes used to identify the level of privacy a patient will be afforded when assigned to this location definition.

Table of codes used to identify the level of care a patient may be afforded when assigned to this location definition.

Table of codes used to specify the institution’s department to which a location belongs, or its cost center.

Table of codes used to identify the specialty of the care professional who is supported when using this location definition.

HL7-defined table of codes used to identify the day(s) of the week when a location may be scheduled for appointments.

Table of codes used to define whether a Charge Description Master description may be overridden or if it must be overridden.

Table of codes used to define the event upon which a charge should be generated.

Table of codes used to identify the kind of patient document.

HL7-defined table of codes used to record the state of a document in a workflow.

HL7-defined table of codes that specify the degree to which special confidentiality protection should be applied to information. The assignment of data elements to these categories is left to the discretion of the healthcare organization.

HL7-defined table of codes used to define whether a patient document is appropriate or available for use in patient care.

HL7-defined table of codes used to describe the availability of a document in relation to the type of storage.

Table of codes used to describe the kind of appointment or the reason why an appointment has been scheduled.

Table of codes used in an appointment request to describe the kind of appointment.

Table of codes used to describe an appointment status from the perspective of the entity assigned to fulfill the appointment.

Table of codes used to indicate whether the appointment resource may be substituted for another by the entity assigned to fulfill the appointment.

Table of codes used to designate the urgency of a referral.

Table of codes used to identify the general category of healthcare professional desired to satisfy a referral.

Table of codes used to identify the expected response from the healthcare professional receiving a referral.

Table of codes used to define the state of a referral.

Table of codes used to describe the patient care setting where a referral should take place.

Table of codes specifying the identification of the insurance company or other entity that administers the authorizing coverage plan. No suggested values.

Table of codes used to define the relationship between a referral recipient and a patient or between a referral initiator and a patient.

HL7-defined table of codes used in Patient Care for the intent of a problem or goal.

Table of codes specifying the census tract in which the specified address resides. No suggested values.

Table of codes specifying the county or parish in which the specified address resides. No suggested values.

Table of encoding characters used for base64 MIME encoding. Base64 is defined as follows (adapted from MIME Internet standard RFC 1521).

Table of codes specifying a subset of the media subtypes of binary data that are encoded in an ascii structure or stream.

Table of codes specifying the administered vaccines. The values are maintained by the US Centers of Disease Control. The code system is maintained by the CDC, and may be found at URL; https://phinvads.cdc.gov/vads/ViewCodeSystem.action?id=2.16.840.1.113883.12.292 The value set is maintained by the CDC and may be found at URL: https://phinvads.cdc.gov/vads/ViewValueSet.action?id=ABDEE003-77C3-48E7-B941-EBF92B6B81FC

Table of codes specifying the billing category codes for any classification systems needed, for example, general ledger codes and UB92 categories. No suggested values.

Table of codes used to describe acceptable start and end times, as well as days of the week, for appointment or resource scheduling.

Table of codes specifying an associated party's disability. No suggested values.

Table of codes specifying the patient's primary language. No suggested values.

Table of codes specifying the CN identification source. No suggested values.

HL7-defined table of codes that specify whether a composite price range is experssed as a flat rate or a percentage.

HL7-defined table of codes identifying the type of encoding used to represent successive octets of binary data as displayable ASCII characters. These are defined by IETF; more information may be found at https://www.ietf.org/rfc/rfc1521.txt

Table of codes which specify the unique name of the system that stores the data. It was previously named the Application ID. No suggested values.

HL7-defined table of codes specifying the type of UID (Universal Identifier). Open Issue: Table 0301 has a mix of class and instance identifiers for namespaces, which is improper. The values for instances. such as CLIA, CLIP, CAP, and NPI. These were added for pragmatic issues related to older datatypes that were universally bound tand should not be here but are needed for implementation pragmatics. These should be annotated in Comment or Usage Notes that these are not universal ID types really.

Table of codes specifying the point where patient care is administered. It is conditional on Person Location Type (e.g., nursing unit or department or clinic). No suggested values.

Table of codes specifying the patient's room. No suggested values.

Table of codes specifying the patient's bed. No suggested values.

Table of codes specifying the categorization of the person's location.

Table of codes specifying the status or availability of the location, such as the bed status. No suggested values.

Table of codes specifying the building where the person is located. No suggested values.

Table of codes specifying the floor where the person is located. No suggested values.

Table of codes specifying the type of insurance coverage or what types of services are covered for the purposes of a billing system. For example, a physician billing system will only want to receive insurance information for plans that cover physician/professional charges.

Table of codes specifying a next of kin/associated party's job status.

Table of codes specifying the extent of insurance coverage for a participating member (e.g., single, family, etc.). No suggested values.

Table of codes specifying how an insurance policy is established. No suggested values.

Table of codes specifying whether or not the patient has a living will and, if so, whether a copy fo the living will is on file at the healthcare facility. If the patient does not have a living will, the value of this field indicates whether the patient was provided information on living wills.

Table of codes specifying whether the patient wants to donate his/her organs and whether an organ donor card or similar documentation is on file with the healthcare organization.

Table of codes specifying the coded entry associated with a given point in time during the waveform recording. Note codes beyond 9903 may exist; extensions to this table may be done by incrementing the code value.

Table of codes specifying the accounting code that identifies the department in order to charge for the item. No suggested values.

Table of codes identifying an item in order to charge for the item. No suggested values.

HL7-defined table of codes specifying the method by which treatment is dispensed.

HL7-defined table of codes specifying the status of the treatment administration event.

HL7-defined table ofstatus codes of record operation. Used in Version 2 messaging, these are used in the RXA segment in the vaccine messages, where a method of correcting vaccination information transmitted with incorrect patient identifying information is needed. As of version 2.6, this table was replaced with table 0206, whose values are defined by code system 2.16.840.1.133883.18.111.

Table of codes specifying an identifier code to show which characteristic is being communicated with the segment.

Table of codes specifying an identifier code to show which relationship is being communicated with the segment.

Table of codes specifying the level on which data are being sent. It is the indicator used to send data at two levels, visit and account. HL7 recommends sending an "A" or no value when the data in the message are at the account level or "V" to indicate that the data sent in the message are at the visit level.

Table of codes that specify a person's job code. No suggested values.

Table of codes that specify a person's employee classification. No suggested values.

HL7-defined table of codes used to specify the method by which the quantity distributed is measured.

HL7-defined table of codes used to specify the basis for marketing approval.

HL7-defined table of codes used to specify the type of facility.

HL7-defined table of codes used to indicate (in certain systems) whether a lower level source identifier is an initiate or accept type.

Table of codes specifying the driver's license issuing authority. No suggested values.

Table of codes used to specify to which person the disability information relates in the message. For example, if the value is PT, the disability information relates to the patient.

Table of codes used to specify the interval between repeated services. See the Comment/Usage Note in the table below, as the table contains both precoordinated codes that may be used in an HL7 field or component and also explanatory patterns illustrating the syntax used to construct expressions using the codes and other modifiers.

Table of codes used to specify the reason for which the referral will take place.

HL7-defined table of codes used to specify the status of the practitioner's speciality certification.

Table of codes specifying the type of number used for the practitioner identification.

Table of codes specifying the status of the patient's or the patient's representative's consent for responsibility to pay for potentially uninsured services. This element was introduced to satisfy CMS Medical Necessity requirements for outpatient services in the United States. Includes concepts such as (a) whether the associated diagnosis codes for the service are subject to medical necessity procedures, (b) whether, for this type of service, the patient has been informed that they may be responsible for payment for the service, and (c) whether the patient agrees to be billed for this service.

Table of codes that specify a procedure code modifier to a procedure code. Procedure code modifiers are defined by regulatory agencies such as CMS and the AMA. Multiple modifiers may be reported. The modifiers are sequenced in priority according to user entry. This is a requirement of the UB and the 1500 claim forms. Multiple modifiers are allowed and the order placed on the form affects reimbursement.

Table of codes that specify a guarantor's credit rating. No suggested values.

Table of codes that specify a designation as a military recipient. This field is defined by CMS or other regulatory agencies. No suggested values.

Table of codes that specify a military program for the handicapped in which a patient is enrolled. No suggested values.

Table of codes used to specify the relationship of the patient to the insured, as defined by CMS or other regulatory agencies.

Table of codes that specify reasons an appeal was made on a non-concur for certification. No suggested values.

Table of codes that specify a certification agency. No suggested values.

Table of codes specifying the names of the principal country subdivisions (e.g., provinces or states). The values in the table are country specific. For example, in the US, the Federal Information Processing Standard (FIPS) alpha codes may be used by local agreement.

Table of codes that specify the special program indicator, as described in the UB82 Field 44. This field is defined by HCFA or other regulatory agencies in the US. Note that The UB codes listed as examples in earlier released of the HL7 Standards are not an exhaustive or current list; refer to a UB specification for additional information

HL7-defined table of codes of PSRO/UR approval indicators, as used in the UB82 field 87. This field is defined by HCFA (in the US) or other regulatory agencies. Note that this form type is no longer used in the US, and the codes listed (as examples) are not an exhaustive or current list; refer to a UB84 specification for additional information.

Table of codes that specify a National Uniform Billing Committee (NUBC) code for the event or occurrence relating to a bill that may affect payer processing. In the US, NUBC codes generally used, see code system 2.16.840.1.113883.6.301.7; more information may be found at http://www.nubc.org/become.html

Externally defined table of codes specifying a National Uniform Billing Committee (NUBC) code that identifies an event that relates to the payment of a claim. In the US, NUBC codes generally used, see code system 2.16.840.1.113883.6.301.8; more information may be found at http://www.nubc.org/become.html. The UB-04 Data Specifications Manual with the codes is available by subscription from NUBC at http://www.nubc.org/become.html.

HL7-defined table of codes that represent an exception identifier code; that is, a code that is not defined in the value set (either model or site-extended). These are occationsally referred to a 'flavors of null' although this set of concepts is specific to the CWE datatype used in Version 2 messaging, and the codes may be used in the 'identifier' component of the 'triplets' in that datatype.

HL7-defined table of abstract message structure codes. Each code identifies a specific message structure abstract syntax as published in the HL7 Version 2 standard.

HL7-defined table of codes used to specify the type for the master file record identifier.

HL7-defined table of codes that specify the scheme used when any alternative character sets are specified in the second or later iterations of MSH-18 Character Set, and if any special handling scheme is needed.

HL7-defined table of codes specifying the HL7 (communications) error code.

Table of codes specifying the name and/or code of a group of practitioners to which this practitioner belongs. No suggested values.

Table of codes that identify the significance or priority of the diagnosis code. Note that the codes are numeric, and the number of the code represents the ordinal priority of the associated diagnosis. The predefined codes are the most common, and just a starter set, as the codes are an unbounded list; additional ranked procedures may be signified by incrementing the code value as needed.

Table of codes specifying an educational degree (e.g., MD). Used in the CNN datatype (names and identifiers of clinicians) in Version 2 messaging.

Table of codes that identify a sending application among all other applications within the network enterprise. The network enterprise consists of all those applications that participate in the exchange of HL7 messages within the enterprise. No suggested values.

Table of codes specifying the site-specific name for the facility used by this application. No suggested values.